A note on the selection of priority rules in software packages for project management

Various software packages for project management include a procedure for resource-constrained scheduling. In several packages, the user can influence this procedure by selecting a priority rule. However, the resource-allocation methods that are implemented in the procedures are proprietary information; therefore, the question of how the priority-rule selection impacts the performance of the procedures arises. We experimentally evaluate the resource-allocation methods of eight recent software packages using the 600 instances of the PSPLIB J120 test set. The results of our analysis indicate that applying the default rule tends to outperform a randomly selected rule, whereas applying two randomly selected rules tends to outperform the default rule. Applying a small set of more than two rules further improves the project durations considerably. However, a large number of rules must be applied to obtain the best possible project durations.     

How Does Hemicelluloses Removal Alter Plant Cell Wall Nanoscale Architecture and Correlate with Enzymatic Digestibility?

Thorough understanding of how hemicelluloses removal influences cell wall nanoscale architecture and cellulose digestion is of crucial importance for enabling low-cost industrial conversion of lignocellulosic biomass to renewable biofuels. In this work, delignified poplar cell walls, after various degrees of hemicelluloses removal, were characterized by Fourier transform infrared imaging spectroscopy and atomic force microscopy to evaluate enhancement in cell wall digestibility. There was a gradual decrease in hemicelluloses content with dilute alkali treatment, which resulted in alterations in the nanoscale architecture and crystallinity of cell walls. Removal of hemicelluloses did not disrupt the integrity of microfibrils but resulted in exposure of microfibrils and a decrease in the diameter of microfibrils. X-ray analysis indicated that the increase in crystallinity beyond natural variations in the crystallinity of cellulose was mainly attributable to removal of hemicelluloses. In conclusion, alterations in the architecture and crystallinity of cell walls facilitated enzymatic digestion of delignified poplar, enhancing cellulose conversion from 68.24 to 75.16 %.     

Production of Cold-Flow Quality Biodiesel from High-Acidity On-Edible Oils—Esterification and Transesterification of Macauba (<Emphasis Type="Italic">Acrocomia aculeata</Emphasis>) Oil Using Various Alcohols

Biodiesel is an alternative fuel that has been used for partial or total substitution of diesel to reduce its environmental impacts. Prior studies on this topic have focused on the quest for better synthesis process, new catalysts and low-cost non-food and raw materials to improve the economic and sustainable production as well as product quality. In this study, acidic oil from macauba, a palm tree native to South America that has no food uses, was converted into biodiesel. The esterification and transesterification reactions were performed with methanol, ethanol and isobutanol with the goal of improving the cold properties of the biodiesel. The isobutyl ester exhibited the lowest freezing point temperature but underperformed outside of international specifications for kinematic viscosity; it also exhibited a low ester content. The methyl and ethyl esters were within the specifications of the international standards for ester content, density, kinematic viscosity and sulphur content. The ethyl ester produced from macauba oil displayed better properties in cold conditions than methyl and isobutyl esters studied here, with a cold filter plugging point of 0 °C. Its onset crystallisation temperature was reduced from ?5.96 to ?13.41 °C when subjected to fractional crystallisation. The ethyl ester exhibited the best lubricity value among the other esters studied.     

Establishment and Early Growth of Willow at Different Levels of Weed Competition and Nitrogen Fertilization

To evaluate the effects of weed competition and nitrogen fertilization on the early growth performance of willow, cuttings of the clone Tora (Salix schwerinii x S. viminalis) were planted in buckets together with model weeds (spring barley or white mustard) sown 15, 26, and 30 days after willow planting. The buckets were fertilized with 30 or 90 kg N ha^?1. Willow with weeds sown after 15 days produced less biomass and smaller leaf area and had a lower maximum shoot height compared to willow planted without weeds and willow with weeds sown after 26 or 30 days. Fertilization with 90 kg N ha^?1 gave higher willow biomass production in willow with weeds sown after 26 or 30 days. Type of model weed had no effect on willow performance. Weed biomass and maximum shoot height were higher in weeds planted without willows compared to the willow-weed mixtures. A high nitrogen level gave more weed biomass when planted without willows and in the willow-weed mixture with weeds sown after 15 days. We conclude that for the given high density of willow, competition from weeds emerging soon after willow planting had strong effect on early production. Furthermore, if there is a risk of weed infestation, fertilization should be delayed.     

Simultaneous Saccharification and Fermentation of Hydrothermal Pretreated Lignocellulosic Biomass: Evaluation of Process Performance Under Multiple Stress Conditions

Industrial lignocellulosic bioethanol processes are exposed to different environmental stresses (such as inhibitor compounds, high temperature, and high solid loadings). In this study, a systematic approach was followed where the liquid and solid fractions were mixed to evaluate the influence of varied solid loadings, and different percentages of liquor were used as liquid fraction to determine inhibitor effect. Ethanol production by simultaneous saccharification and fermentation (SSF) of hydrothermally pretreated Eucalyptus globulus wood (EGW) was studied under combined diverse stress operating conditions (30–38 °C, 60–80 g of liquor from hydrothermal treatment or autohydrolysis (containing inhibitor compounds)/100 g of liquid and liquid to solid ratio between 4 and 6.4 g liquid in SSF/g unwashed pretreated EGW) using an industrial Saccharomyces cerevisiae strain supplemented with low-cost byproducts derived from agro-food industry. Evaluation of these variables revealed that the combination of temperature and higher solid loadings was the most significant variable affecting final ethanol concentration and cellulose to ethanol conversion, whereas solid and autohydrolysis liquor loadings had the most significant impact on ethanol productivity. After optimization, an ethanol concentration of 54 g/L (corresponding to 85 % of conversion and 0.51 g/Lh of productivity at 96 h) was obtained at 37 °C using 60 % of autohydrolysis liquor and 16 % solid loading (liquid to solid ratio of 6.4 g/g). The selection of a suitable strain along with nutritional supplementation enabled to produce noticeable ethanol titers in quite restrictive SSF operating conditions, which can reduce operating cost and boost the economic feasibility of lignocellulose-to-ethanol processes.     

Impact of Different Lignin Fractions on Saccharification Efficiency in Diverse Species of the Bioenergy Crop Miscanthus

Lignin is a key factor limiting saccharification of lignocellulosic feedstocks. In this comparative study, various lignin methods—including acetyl bromide lignin (ABL), acid detergent lignin (ADL), Klason lignin (KL), and modified ADL and KL determination methods—were evaluated for their potential to assess saccharification efficiency. Six diverse accessions of the bioenergy crop miscanthus were used for this analysis, which included accessions of Miscanthus sinensis, Miscanthus sacchariflorus, and hybrid species. Accessions showed large variation in lignin content. Lignin estimates were different between methods, but (highly) correlated to each other (0.54?≤?r?≤?0.94). The strength of negative correlations to saccharification efficiency following either alkaline or dilute acid pretreatment differed between lignin estimates. The strongest and most consistent correlations (?0.48?≤?r?≤??0.85) were obtained with a modified Klason lignin method. This method is suitable for high throughput analysis and was the most effective in detecting differences in lignin content (p?<?0.001) between accessions.     

Sequential Thermochemical Hydrolysis of Corncobs and Enzymatic Saccharification of the Whole Slurry Followed by Fermentation of Solubilized Sugars to Ethanol with the Ethanologenic Strain <Emphasis Type="Italic">Escherichia coli</Emphasis> MS04

Interest in the use of corncobs as feedstock for bioethanol production is growing. This study assesses the feasibility of sequential thermochemical diluted sulfuric acid pretreatment of corncobs at moderate temperature to hydrolyze the hemicellulosic fraction, followed by enzymatic hydrolysis of the whole slurry, and fermentation of the obtained syrup. The total sugar concentration after enzymatic hydrolysis was 85.21 g/l, i.e., 86 % of the sugars were liberated from the polymeric fractions, together with a low amount of furfural (0.26 g/l) and 4.01 g/l of acetic acid. The syrups, which contained 36.3, 40.9, 4.47, and 1.84 g/l of xylose, glucose, arabinose, and mannose, respectively, were fermented (pH 7, 37 °C, 150 rpm) to ethanol with the metabolically engineered acetate-tolerant Escherichia coli strain MS04 under non-aerated conditions, producing 35 g/l of ethanol in 18 h (1.94 g_EtOH/l/h), i.e., a conversion yield greater than 80 % of the theoretical value based on total sugars was obtained. Hence, using the procedures developed in this study, 288 l of ethanol can be produced per metric ton of dry corncobs. Strain MS04 can ferment sugars in the presence of acetate, and the amount of furans generated during the sequential thermochemical and enzymatic hydrolysis was low; hence, the detoxification step was avoided. The residual salts, acetic acid, and solubilized lignin present in the syrup did not interfere with the production of ethanol by E. coli MS04 and the results show that this strain can metabolize mixtures of glucose and xylose simultaneously.     

Ecosystem Services of Woody Crop Production Systems

Short-rotation woody crops are an integral component of regional and national energy portfolios, as well as providing essential ecosystem services such as biomass supplies, carbon sinks, clean water, and healthy soils. We review recent USDA Forest Service Research and Development efforts from the USDA Biomass Research Centers on the provisioning of these ecosystem services from woody crop production systems. For biomass, we highlight productivity and yield potential, pest susceptibility, and bioenergy siting applications. We describe carbon storage in aboveground woody biomass and studies assessing the provision of clean and plentiful water. Soil protection and wildlife habitat are also mentioned, in the context of converting lands from traditional row-crop agriculture to woody production systems.